Notify me when the price drops
We will email you if we find a lower price on this product!
Features:
1. Handheld three-in-one graphical multimeter with a 3.3-inch TFT color display and an oscilloscope, which will replace digital multimeters and analog meters in the .
2. Double isolation protection and voltage resistance protection meet CAT III high safety standards and are for CE compliant.
3. Auto-ranging, true RMS display, data hold support, and a key layout that differs from traditional oscilloscope and multimeter designs.
4. High-precision multimeter with 6000 counts, capable of measuring AC/DC voltage, resistance, capacitance, diodes, AC/DC current, and frequency.
5. AC millivolt test: AC/DC current 0-10A; resistance: 0-60MΩ; capacitance: 0-99.99mF; on/off switch <50Ω; sampling rate 3 times per second; and programmable auto power off.
6. Test pen mode, induction and contact test pen mode. 7. 10MHz real-time sampling, 48NSa/s real-time sampling rate;
8. The oscilloscope can measure the attenuation voltage of input DC and AC impedance probes;
9. Standard EVA carrying pouch and additional silicone stylus.
10. The multimeter interface features four data screens, allowing you to capture, save, export, and reset screen data at any time.
11. The silicone stylus, silicone buttons, and the entire silicone body provide a high-end feel and added value.
12. Supports firmware upgrades, with more features to be added in the .
13. Screenshots: Screenshots can be taken on all screens, just like on mobile phones. Images are saved on the device and can be exported via USB.
14. Oscilloscope mode: No dedicated oscilloscope probes are required; measurements can be made with a multimeter probe.
15. Standard square wave output: 3V, 1kHz, with upgrades to support sine and triangle waves.
16. Waveform storage depth: 64KB, capable of storing 24 images.
Specifications:
Part Name: Digital Multimeter Graphic Oscilloscope
Material: ABS
Color: Yellow-Black
size: As shown
Input Coupling: AC/DC
Input Impedance: 1MΩ
Input Attenuation: x1, x10
Maximum Input Voltage: 300V to ground
Horizontal Sampling Rate Range: 1.5µs/s to 48µs/s
Waveform Interpolation Sweep Rate Range: 100ns/div to 20s/div
Timebase Accuracy: 20ppm
Sampling Depth: 64KB
Record Length
Vertical Sensitivity: 20mV/div to 100V/div
Rise Time: Less than 10ns
Gain Accuracy: 3% Lower limit;
Offset range; Analog bandwidth; Low frequency response: greater than 10Hz;
DC gain accuracy;
Automatic measurements: Period, frequency, peak-to-peak value, maximum value, minimum value, and RMS value;
Trigger mode: Auto, Normal, Single;
Trigger edge: Rising edge, Falling edge;
DC voltage: Input impedance: 10MΩ; Maximum input voltage: 600V;
AC voltage: Input impedance: 10MΩ; Maximum input voltage: 600V;
Frequency range: 40-1000Hz
Package contents:
1 * Oscilloscope and multimeter
1 * USB data cable
1 * Test
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
We only ship to confirmed ebay Order addresses. Please comfirm that your Order address is in line with your shipping address.
Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size.
It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.